July 18, 2013

How to Update Galaxy Fame S6810 with Android 4.1.2 XXAME2 Jelly Bean Official Firmware

Samsung has released Android 4.1.2 Jelly Bean firmware update with base firmware XXAME2 on the Samsung Galaxy Fame with model number GT-S6810. The new official firmware is currently available in select Southeast Asia countries as an Over-The-Air (OTA) update as well as through Samsung KIES.

Firmware details
PDA: S6810XXAME2
CSC: S6810OLBAME1
MODEM: S6810DXAME1
Version: Android 4.1.2
Built date: May 31, 2013
Regions: Indonesia, Vietnam

Samsung Galaxy Fame S6810 users who missed the OTA update notification or unable to access the update over Samsung KIES, may follow our step-by-step guide to install the update manually.

Pre-requisites
1. Install USB Drivers for Samsung Galaxy Fame on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. Ensure the battery of the phone is charged more than 80 per cent.
5. The Android 4.1.2 XXAME2 Jelly Bean firmware is compatible only with Samsung Galaxy Fame S6810. Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy Fame by navigating to Settings >> About Phone.

Files Required
1. Android 4.1.2 XXAME2 Jelly Bean Firmware for Samsung Galaxy Fame S6810
2. Odin 3.07 (Mirror Link)

Steps to Update Galaxy Fame S6810 with Android 4.1.2 XXAME2 Jelly Bean Firmware
Step 1: Extract Firmware zip file using WinRAR/7-Zip/WinZip or any other extracting tool, you will get a .tar.md5 file and some other files (optional).
Step 2: Extract Odin zip file and you will get Odin3 v3.07.exe along with few other files.
Step 3: Power off your phone. Wait 5-6 seconds for vibration to confirm complete switch off.
Step 4: Boot the device into Download Mode by pressing and holding Volume Down + Home buttons together and then press the Power button until the device turns on. Now press the Volume Up button to enter Download Mode.
Step 5: Run Odin on the computer as an Administrator.
Step 6: Connect the Galaxy Fame to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.
Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.
Step 7: Choose the following files in Odin from extracted S6810XXAME2 firmware folder by using respective checkboxes:
  • Select the PDA checkbox, and choose the file named .tar or .md5.
  • Click the Phone checkbox, and choose the file with 'modem' in its name (ignore if there is no such file)
  • Click the CSC checkbox, and select the file with 'csc' in its name (ignore if such file is missing)
  • Choose the PIT checkbox, and choose the .pit file. Use only the file obtained during extracting in step 1 above, otherwise ignore it.
Step 8: In Odin, enable Auto Reboot and F. Reset Time checkboxes. Also, ensure the Re-Partition checkbox is chosen only if a .pit file was chosen in the previous step.
Step 9: Verify everything suggested in Step 7 and Step 8 is done correctly. Then hit the START button to begin the installation process.
Step 10: Once the installation process is completed, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from computer.

Samsung Galaxy Fame S6810 should be now updated with official Android 4.1.2 XXAME2 Jelly Bean. Head over to Settings >> About Phone to verify the software version running on the device.

Note: If Galaxy Fame S6810 stuck at booting animation after Step 10 then go to recovery mode (press and hold the Volume Up, Home and Power buttons together) and perform Wipe data/Factory Reset and Wipe Cache Partition task before selecting reboot system now function. In recovery mode use Volume keys to navigate between options and Power key to select the option. Please note, performing wiping task will erase your device internal memory data and not external SD card data.

Click here to know How to Root Galaxy Fame S6810 running on Android 4.1.2 Jelly Bean firmware.

10 comments:

  1. I have the s6810p is that the same or will I mess my phone if I try to root it

    ReplyDelete
  2. I want official firmware for S6812 Galaxy Fame DUOS

    ReplyDelete
  3. Tenho um Galaxy Fame GT-S6810B, do 4.1.2 Jelly Bean, gostaria de saber se o root do Fame Gt-S6810 funciona no GT-S6810B.

    ReplyDelete
  4. help help plz when i click Volume Down + Home + power no thing happen and it starts in normal mode heeeeeelp

    ReplyDelete
    Replies
    1. Jaaaaa you dont know how i like your problem !

      Delete
  5. Terimakasih banyak informasi yg telah diberikan
    klo ada waktu mampir juga ke blog saya,
    artikel yg anda share sangat menarik, mungkin
    nanti akan saya share ke blog saya
    mohon izin sebelumnya untuk menyedot
    informasi ini : jangan lupa mampir
    ke blog saya Http://www.zodiakpisces.blogspot.com

    ReplyDelete