January 20, 2014

How to Update Galaxy Note 3 N900 with Android 4.4.2 XXUDNA6 KitKat Official Firmware

Samsung has finally started rolling out the Android 4.4.2 KitKat update for the Exynos 5 octa-core variant of the Galaxy Note 3 (SM-N900). The new official firmware is currently available for users in Russia as an Over-The-Air (OTA) update as well as through Samsung KIES.

Firmware details
Version: Android 4.4.2
Build date: Jan 14, 2014
Regions: Russia

Samsung Galaxy Note 3 N900 users who missed the OTA update notification or unable to access the update over Samsung KIES, may follow our step-by-step guide to install the update manually.

1. Install USB Drivers for Samsung Galaxy Note 3 on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. The Galaxy Note 3 should be factory unlocked and not locked to any particular carrier.
5. Ensure the battery of the phone is charged more than 80 percent.
6. The Android 4.4.2 XXUDNA6 KitKat firmware is compatible only with the Galaxy Note 3 with model number SM-N900. Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy Note 3 by navigating to Settings >> About Phone.

Files Required
1. Android 4.4.2 XXUDNA6 KitKat Firmware (Mirror Link 1, Link 2, Link 3, Link 4)
2. Odin 3.07

Other regions: Southeast Asian (Indonesia, Malaysia, Philippines, Singapore, Vietnam, Thailand), India

Steps to Update Galaxy Note 3 N900 with Android 4.4.2 XXUDNA6 KitKat Firmware
Step 1: Extract Firmware zip file using WinRAR/7-Zip/WinZip or any other extracting tool, you will get a .tar.md5 file and some other files (optional).
Step 2: Extract Odin zip file and you will get Odin3 v3.07.exe along with few other files.
Step 3: Switch off the Galaxy Note 3.
Step 4: Boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 5: Run Odin on the computer as an Administrator.
Step 6: Connect the Galaxy Note 3 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.

Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.

Step 7: Select the following files in Odin from extracted N900XXUDNA6 firmware folder:
  • Click the PDA button and select the .tar.md5 file.
  • Click the Phone button and select file with MODEM in its name. Ignore if there is no such file.
  • Click the CSC button and select file with CSC in its name. Ignore if there is no such file.
  • Click the PIT button and select the .pit file. Ignore if there is no such file.
Step 8: In Odin, enable Auto Reboot and F. Reset Time checkboxes. Also, ensure the Re-Partition checkbox is chosen only if a .pit file was chosen in the previous step.
Step 9: Verify everything suggested in Step 7 and Step 8 is done correctly. Then hit the Start button to begin the installation process.
Step 10: Once the installation process completes, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect it from the computer.

Samsung Galaxy Note 3 N900 should be now updated with Android 4.4.2 XXUDNA6 KitKat official firmware. Head over to Settings >> About Phone to verify the software version running on the device.

Note: If Galaxy Note 3 N900 stuck at booting animation after Step 10 then go to recovery mode (press and hold the Volume Up and Power buttons together) and perform Wipe data/Factory Reset and Wipe Cache Partition task before selecting reboot system now function. In recovery mode use Volume keys to navigate between options and Power key to select the option. Please note, performing wiping task will erase your device internal memory data and not external SD card data.

Click here to know How to Root Galaxy Note 3 N900 running on Android 4.4.2 KitKat firmware.


  1. The official Android 4.4.2 update for Galaxy Note 3 (SM-N900 and SM-N9005) is now available. Check it out here http://goo.gl/C04xBF

  2. Great. KitKat features make it the best among all version even for low spec phones.

  3. will this erase the files on the phone?

  4. Galaxy note 3 contract deals http://galaxynote3contract.blogspot.com/

  5. Android 4.4.2 KITKAT has been released,the issues that I am facing ... Droping calls( dialing or receiving)....... also GPS takes forever to accurately show in map....
    Wifi - showing less signal... ( to be verified in few more days)
    battery is fine, but takes longer to charge.

    Anyone find a solution yet.
    this is so anoying!!!

    Android 4.4.2 KITKAT.

    How To Install Flash Player on Samsung Galaxy S5